The DC-300 Duplicating Code Machine is two machines in one. It can both originate and duplicate automotive keys with ease.

Code cutting a key is a simple process: insert the depth cam and space key into the machine, slide in the blank and begin cutting. Code cutting can be done in about 30 seconds for a single sided key.

Duplicating a key is even easier; clamp both keys into the vises, turn the machine on and start cutting. Copying a key on the DC-300 takes about 20 seconds.

 

A highlight of the DC-300 is its’ ease of use. Only a few minutes of training is required to familiarize your employees with the features & operation of the DC-300.

 

Here’s just a few of the outstanding features of the DC-300:

 

As new code series are introduced, all that is needed is a new space key, in most cases. Occasionally, depending on which depth cams you have with your machine, another depth cam may be required.

A wire deburring brush is included with the machine. A nylon brush is also available.

The DC-300 will hold .0005″ accuracy consistently – no need to readjust the machine continually!

The DC-300 has a double sided vise. It will hold almost all automotive keys without any tipping. A pair of brass shims is also included with the machine in the rare case that a key tips.

The DC9040 cutter supplied with the machine will cut thousands of keys without the need for re-sharpening when used properly. Please note: the cutting wheel on the DC-300 is not designed to cut steel keys. A carbide cutter can be ordered for the machine for steel applications.

Sealed ball bearings are used throughout the machine. These bearings require no maintenance whatsoever. The only maintenance the DC-300 requires is a regular cleaning, and a few drops of oil onto the slide rod and guide.

The purchase price of the DC-300 does not include any depth cams or space keys.

 

For special application parts for the DC-300 & instructions on their use

Mitsubishi 270T Space Key Insertion & Use

Daewoo 300T Space Key Insertion & Use

 

DC-300:                     Duplicating Code Machine

DC-300WV Winz:      Duplicating Code Machine Winzer

DC-300WV Wurth:     Duplicating Code Machine Wurth

DC9040:                    Cutting Wheel

DC9040ALC:             Cutting Wheel, Coated

DC9040C:                 Carbide DC9040 Cutting Wheel

DCCHR02:                Chrysler/Dodge/Jeep/Eagle Kit

DCFMK06:                Foreign Cycle  Kit

DCFRD01:                Ford Kit

DCGMK05:               GM/Geo Kit

DCHAR02:                Harley Davidson Kit

DCHNA02:                Acura / Honda Kit

DCHON04:               Honda Cycle Kit

DCHYD02:               Hyundai Kit

DCISZ01:                 Isuzu Kit

DCKAW04:              Kawasaki Cycle Kit

DCKIA05:                Kia Kit

DCMAZ01:              Mazda Kit

DCMER01:              Mercedes Kit

DCMIT02:           Mitsubishi Kit

DCMS001:          Plunger Spring

DCMS051:          Yoke Knob

DCMS151:           DC-300 Main Guard

DCMS251:           Nylon Deburring Brush

DCMS252:           Steel Deburring Brush

DCMS350:           DC-300 Instruction Manual

DCMS401:           5/16" Hex Key Short Arm

DCMS402:           3/32" Hex Key Short Arm

DCMS410-PK5:   Brass Shim (Pack of 5)

DCMS454:           Motor Bushing

DCMS551:           Tip Stop

DCMS603:           Rubber Bumper

DCMS651:           2" Pulley

DCMS701:           5/8 Rod Wiper

DCMS737:           DC-300 Spindle/Spacer/Bearings

DCMT001:           Indicating Light

DCMT002:           110 V AC Motor (1/6 hp 48 frame)