FRA #1 - #2 ACCESSORIES: (NOTE: same as FRA #2J)

 

PART #          Descriptions

 

FRA1:               #1 Code Machine

FRA2:               #2 Code Machine

FRA2-12V:       #2 Code Machine, 12 Volt

FRA2J:             #2J Code Machine For Detention Work

FRA2J-AA1:     #2J Code Machine For Assa/Southern A1

FRA2JCONV:   Convert FRA2 to FRA2J

2DMS501:         FRA2D Space/Depth Indicator

CNCMT002:      220V Motor (1/12 hp 42 Frame)

DCMS410-PK5: Brass Shim (Pack of 5)

DCMT002:         110 V AC Motor (1/6 hp 48 frame)

F1MS301:          #1 Cutter Guard

F2BA001:          Crank Bearing

F2BA002:          Feed Handle Bearing

F2BA003:          Spindle Bearing

F2MS001:          Compression Spring (Return Spring)

F2MS002:          Extension Spring

F2MS003-PK5:  Compression Spring (Vise Spring - Pack of 5)

F2MS053:          Detent Knob

F2MS102:          Depth Plate

F2MS103:          Dial Indicator Plate

F2MS104:          Depth Plate Pointer

F2MS105:          Spacing Block Indicator

F2MS301.1:       #2 Belt Guard

 

Standard Cylinder: Arrow, Corbin, Kwikset, Lockwood, Russwin,Sargent, Schlage, Weiser, Weslock

Domestic Automotive: Buick, Cadillac, Chevrolet, Chrysler, Dodge, Ford, GMC, Jeep, Lincoln, Mercury, Oldsmobile, Plymouth, Pontiac

Foreign Automotive: Alfa Romeo, Audi, BMW, Daihatsu, Eagle, Fiat, Geo, Honda, Hyundai, Isuzu, Mazda, Mitsubishi, Nissan, Peugeot, Porsche, Renault, Saab, Saturn, Subaru, Suzuki, Toyota, Volkswagen, Volvo, Yugo

Motorcycle Keys: BMW, Harley-Davidson, Honda, Kawasaki, Suzuki, Triumph, Yamaha

Padlock Keys: Abus, Almont, American, Ilco, Master, McKinney, Slaymaker, Squire, WB, Yale

Letterbox Keys: Auth, Couch, Eagle, Florence, Keil, L & F, Lyon, National, Yale

Safety Deposit Box Keys: Diebold, HHM, Ilco, LeFebure, Miles Osborn, Mosler, S & G, Security, Yale

Interchangeable Core: Arrow, Best, Falcon, Corbin-Russwin, Sargent

High Security Keys: Emhart, Medeco Commercial & Bi-Axial, Assa, Schlage Primus, Kaba Peaks

Tibbe 6 & 8 wafer keys can be cut with an optional vise fixture

 

“The Framon #2 is without a doubt the easiest and most accurate code machine I’ve ever used.”

Bill Donoughue, Professional Locksmith

The Framon Depth & Space Manual is the core of the Framon #2. The keys mentioned above are only a portion of those that you will have the capability to cut. The manual contains:

Over 900 cylinder key charts

18 letterbox charts

32 safety deposit box charts

The Real Beauty Of The Machine Is It’s Low Cost….. In addition to being less expensive than almost any other code machine, the year-to-year cost of keeping your machine up to date is also lower than any others: zero! Because the #2 utilizes manufacturers’ depths & spaces to originate keys, all you need to do is copy new information into your book (blank pages provided).

Everything You Need In One Package…..

At Framon, we don’t believe in a lot of extras. Here’s everything you get when you buy a #2 Code Machine

 

F2MS350              Depth & Space Manual

F2MS451              6" Dial Calipers

FC8445                 Standard Cutter

F2MSSB1              #1 Spacing Block

FC8612                  Medeco Cutter

F2MSSB2              #2 Spacing Block

FC8735                  Foreign Auto Cutter

F2MSSB3              #3 Spacing Block

FFS1045                .045" HSS Slotter

F2MSSB4               #4 Spacing Block

F2MS552               Spacing Clip

F2MSSB5              #5 Spacing Block

F2MS402               1/8" Allen Wrench

F2MSSB6              #6 Spacing Block

DCMS410-PK5      Brass Shim - 5 Pack

 

Possibly The Most Perfect Code Machine Ever Created……

All of the extras included with the Framon #2 make it a great package. Here are a few of the features that make it a perfect code machine:

Accuracy: All Framon key machines are hand assembled and hand fit. This ensures that before your machine reaches you, it has originated keys accurate to one-half thousandth of an inch (.0005″, about the thickness of a hair). This tolerance assures a perfect key every time!

 

Straight-In Feed: The #2 utilizes a straight-in feed approach. The straight-in feed of the #2 provides a perpendicular cut at the root of the key. The flat of the cut will always be the same depth from the left side of the cut to the right. Machines that use a pivot approach can produce keys that turn one way but not the other. The drawing at the right shows the profile of a key cut by a machine that pivots. The different shear lines from the left to the right side of the key lead to the turning problem.

Rugged & Durable: The #2 is made from heat treated aluminum and steel. The carriage moves forward on a pair of steel slides. Spacing and depth movements take place on pairs of steel pins and screws. There are no small gears to strip out and no plastic parts to wear out. We’ve heard plenty of stories from code machine owners who have dropped the machine off of their workbench and cut a key with no adjustments needed!

 

Cutting Keys By Measurement…..Unequalled Accuracy & Simple To Do

The #2 utilizes actual space & depth information to cut keys. Here’s how it’s done…..

SPACING: To cut a key, you need two dimensions: starting cut (distance from the shoulder to the first cut) and spacing (distance between cuts thereafter), both found

in the Depth & Space Manual. Shown at the right is the Schlage chart from our Depth & Space Manual. Schlage cylinder keys use .231″ starting cut and .156″ spacing. Starting cut is set by zeroing the machine and counting out to .231″. Once set, the the spacing block with .156″ is aligned. Cut to cut spacing is a simple matter of aligning two index marks.

 

DEPTH: Depth settings are made in .001″ increments by means of a micrometer. Reading a micrometer is quite simple – the depth micrometer on the #2 Code Machine is shown to the left. The micrometer depth reading is what gives the #2 its’ extreme accuracy. Once familiar with the machine, you’ll be code cutting keys in 30-45 seconds.

 

Mfgr: Schlage Depths

Series: Pin Tumbler 0-.335

Blanks: 1045C, etc. 1-.320

Cuts Start At: .231 2-.305

Spacing: .156 3-.290

Block #: 1 4-.275

Incr.: .015 5-.260

No. Of Spaces: 5 or 6 6-.245

Spaces: .231, .387, .543, .699, .855, 1.011 7-.230

8-.215

9-.200

 

The Machine That Started It All….

The Framon #1 is the predecessor of the #2. The #1 has a fixed spindle instead of a tilting version. If you’re just getting started and don’t plan on cutting Medeco or Emhart keys, the #1 is the ideal machine. It can originate almost any cylinder key in use today except, of course, Medeco or Emhart. Included with the #1 at time of purchase:

 

F2MS350          Depth & Space Manual

F2MS451          6″ Dial Calipers

FC8445             Standard Cutter

F2MSSB1          #1 Spacing Block

LKMS410           Brass Shim

F2MSSB2          #2 Spacing Block

FC8735              Foreign Auto Cutter

F2MSSB3          #3 Spacing Block

FFS1045            .045″ HSS Slotter

F2MSSB4           #4 Spacing Block

F2MS552           Spacing Clip

F2MSSB5          #5 Spacing Block

F2MS402          1/8″ Allen Wrench

 

If your plans change about cutting angled keys after you have the #1, a conversion kit is available. A new spindle assembly and Medeco cutter are included.

 

 

PART #          Descriptions

 

F2MS302:          #2 Cutter Guard

F2MS303:           Large Chip Guard

F2MS350:           Depth & Space Manual

F2MS351:           Binder for Depth & Space Manual

F2MS355:           Depth & Space Manual Filler (No Binder)

F2MS402:           1/8" Allen Wrench

F2MS451:           6" Dial Caliper

F2MS501:           Feed Handle Cover

F2MS551:           Key Stop (Shoulder Stop)

F2MS552:           Spacing Clip

F2MS601:           Drive Belt for #1, #2, #2J, #2D

F2MS602:           Drive Belt - Green Round for FRA2/SD2

F2MS651:           2 1/2" OD 1/2" Bore Pulley

F2MS910:           Feed Handle Kit

F2MSDB1:          Safety Deposit Spacing Block Set

F2MSSB1:         #1 Spacing Block

F2MSSB2:         #2 Spacing Block

F2MSSB3:         #3 Spacing Block

F2MSSB4:         #4 Spacing Block

F2MSSB5:         #5 Spacing Block

F2MSSB6:         #6 Spacing Block